How to make a google review QR code
SmartQRCode editorial · Updated October 2026
A how to make a google review QR code job is a redirect: the printed modules store a SmartQRCode URL, and the scan opens Google's review form. Paste a review link or a Place ID. Use a Canva one-off static maps file if you will never edit or count scans.
How to make a google review QR code that stays on the receipt
You are about to encode a Google review QR generator destination, not a website homepage and not a Wi-Fi payload. The google_review type is one of four redirects (URL, WhatsApp, Google review, location). The phone hops through the tracker, then lands on the review form with the star rating already showing when Google serves that UI.
This is the wrong job when the venue has no Google Business Profile, when you only need a maps pin, or when a single weekend stall will never change listings. A free static generator such as Canva can bake a maps URL into the modules for that stall. Once ink is down, that static file cannot retarget. A hosted code lasts as long as SmartQRCode keeps resolving the short URL. That is the trade for a Place ID swap after print.
Print size starts at 2 cm across the symbol, quiet zone excluded, for a phone at about 30 cm. Receipts sit at arm length, so 2 cm is the floor, not a poster rule. Leave four empty modules on every side so till-roll trim does not eat a finder.
Do not screenshot the on-screen preview. That pattern encodes /qr-preview, not the live payload. Export PNG, JPG, SVG, or PDF from the paid file.
Build the review redirect in seven settings
- Open the Google review type and paste either the Ask for reviews short link from Business Profile or the Place ID. Either field is valid.
- Confirm the destination is a review form redirect, not a maps pin and not a website URL type.
- Set error correction H (~30%) if you drop a logo in the centre; use M (~15%) on clean uncoated receipt stock with no logo.
- Keep the quiet zone at four modules. Do not butt the total line or a foil stamp against the symbol.
- Download SVG for a vinyl counter mat, or a 300 dpi PNG or PDF at the final millimetre size for toner receipts.
- Print a 2 cm proof on the same thermal stock you will use, then scan with iOS Camera or Android Camera / Google Lens from 30 cm.
- Ignore the on-screen preview for production. If it still shows /qr-preview, you exported the wrong asset.
Paid options are $1.99, $29, $97, and $197. There is no unpaid tier. Archived codes keep scanning; pause is a separate state.
Where should you print a google review QR code?
Receipt review placement belongs after the guest has paid, not on the shopfront where they have not yet decided the visit was worth a star. The pause is the till, the table after dessert, or the hotel checkout slip. A window sticker by the exit can work if the walk-out is slow; it fails if the guest is already on the pavement in glare.
Restaurant menu and table workflows often pair a menu code with this review code. Keep them as two symbols. The camera typically returns one code per frame, so two tents in view make "it scanned the wrong one" look like a broken review form.
Country in the dashboard is not a GPS trace of the table. It is a header on the request. If you need to know which room left a review, put unique hosted codes on unique receipts, not one shared window decal.
A sister walkthrough covers finding the identifier itself: Google review QR from Place ID. If you actually wanted a homepage, use how to make a website URL QR code instead of stuffing a site URL into the review type.
Can you change the Place ID after the tent is printed?
Yes, because the ink stores our URL, not Google's. Change the Place ID or the review link in the dashboard. The next scan follows a 302. A 301 would let browsers cache the old form and freeze later edits, which is why this product does not use 301 on scan redirects.
If you encoded a maps URL in Canva, there is no Place ID swap after print. You reprint. That is correct for a closing-down sale that will never move. It is wasted reprint for a second location or a rebranded listing.
Hosted review codes record scan totals over time, device type, and country. They cannot see who held the phone. Wi-Fi is the type that is not trackable; do not expect a review redirect to behave like a static WIFI payload.
Why the review form never opens on a live table
The usual cause is the wrong identifier: a Place ID for a closed listing, a review link copied from a different brand, or a maps directions URL pasted into the review field. Confirm by opening the same destination on your own phone before you plate. If the form loads in the browser but not from the print, the symbol is the problem: quiet zone cropped, thermal fade, or a screenshot of /qr-preview.
Gloss till paper under a downlighter can fail even when a desk scan worked. Matte stock or a less glossy varnish on the symbol area is the usual fix. Dark grounds with dark modules and no invert will not read. Covering a finder with a logo larger than error correction can restore is another silent fail: the three corner squares still look fine.
If two codes sit on one receipt, the reader returns one of them, not an average. Separate the review symbol from a Wi-Fi or menu mark by more than a phone's field of view.
A paused hosted code stops redirecting on purpose. An archived code keeps scanning. Check which state you set before you reprint the run.
A till that prints the symbol at 1.4 cm to save paper will fail more often than a 2.2 cm mark on the same roll. Thermal receipt paper fades and is often low contrast; use the printer's darkest setting and a size above the 2 cm floor. If the guest folds the receipt into a pocket, the fold line through a finder is a D4 problem, not a Place ID problem. Scan the folded slip as well as the flat one.
Skip the hosted review type for a one-night stall
A Canva one-off or other free static generator is the right tool when the payload will never change and you do not need scan counts. A handwritten "leave us a Google review" plus a static maps URL is enough for a church fete. Paying $1.99 to host a redirect you will delete on Monday is wasted cost.
Using a static file for a restaurant that will open a second site next month is wasted reprint. State that trade and pick. ISO/IEC 18004 still governs the pattern either way. SmartQRCode is the hosted option on smart-qrcode.com when you need the listing to move and the scans to count.
Questions this raises
After payment, on the receipt back or a counter tent. Guests who have not yet eaten rarely open a review form from the shopfront.
Yes. This type is a review form redirect. The modules store a SmartQRCode URL, so a Place ID swap after print reaches the next scan over a 302.
A Canva one-off static maps file is enough for a one-night pop-up you will never retarget or count. Hosted codes exist to edit and to record scans.
No. Totals, device type, and country come from request headers. Analytics cannot see a name or email.
$1.99 covers seven days, then $97 unless you cancel. $29 and $197 also exist. There is no unpaid tier.
Keep going
The tools and playbooks this post refers to, one click away.
Make the code this post is about
$1.99 for 7 days, then a paid plan. Pick a type, brand it, and edit the destination whenever you like, even after it is printed.